Technological Innovation

What is BS EN 61034-2-1:2018?

BS EN 61034-2-1:2018 is an international standard that defines the test procedure for determining the amount of smoke emitted by cables under defined conditions. This standard specifies the measurement method and the apparatus required for the test. It is an important standard in the electrical and electronics industry, as it ensures the safety of cable products by assessing their smoke emission characteristics.

Importance of BS EN 61034-2-1:2018

Smoke emission is a critical factor to consider in case of fire emergencies. When cables burn, they release toxic gases and significant amounts of dense smoke, which can obstruct vision and impede evacuation efforts. BS EN 61034-2-1:2018 sets requirements for the maximum smoke density allowed during combustion of cables. By adhering to this standard, manufacturers can produce safer products that minimize the risk of smoke-related injuries or fatalities in fire incidents.

Testing Procedure according to BS EN 61034-2-1:2018

The testing procedure described in BS EN 61034-2-1:2018 involves placing a cable sample in an enclosed chamber and subjecting it to predefined conditions such as a specific temperature and air flow rate. The smoke emitted by the burning cable is then quantitatively measured using specialized optical instruments. The results are compared against the specified limits set by the standard to assess its compliance with the smoke emission requirements.

Benefits of Compliance with BS EN 61034-2-1:2018

Compliance with BS EN 61034-2-1:2018 helps manufacturers ensure that their cables meet the necessary safety standards and regulations. By producing cables with lower smoke emissions, the risk of reduced visibility during fire incidents is significantly reduced. This not only facilitates safe evacuation but also enables effective firefighting operations by providing better visibility for firefighters.

CONTACT US

Contact: Eason Wang

Phone: +86-13751010017

E-mail: info@iec-equipment.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Scan the qr codeclose
the qr code
TAGS Test Probe BTest Probe 18Test Probe 14Test Probe 17Test Probe 32Test Probe 1Test Probe 2Test Probe 12Test Probe 31Test Probe ATest Probe 41Test Probe 19Test Probe DTest Probe CTest Probe 13Test Probe 11Test Probe 43Test PinTest FingerTest Probe