What is BS EN 60950 2006 ?

Key Requirements of BS EN 60950

3.1 Electrical Safety Requirements

BS EN 60950 establishes a number of requirements for electrical safety, including:

* Conductive materials used in the equipment should be able to prevent electrical currents from flowing through them.

* The equipment should have an appropriate level of insulation to prevent electrical currents from flowing through them.

* The equipment should have appropriate marking and labeling to indicate its electrical safety characteristics.

* The equipment should have a suitable method for disconnecting electrical power in the event of an emergency.

3.2 Mechanical Safety Requirements

BS EN 60950 also sets out requirements for the mechanical safety of ITE equipment. These requirements include:

* The equipment should be designed and manufactured to withstand the normal operating conditions and any abnormal conditions that may arise.

* The equipment should be securely mounted to prevent any unexpected movement or separation from the equipment.

* The equipment should have appropriate mechanisms for preventing damage to the body or property.

* The equipment should have an appropriate method for cleaning and maintaining.

3.3 Thermal Safety Requirements

BS EN 60950 provides requirements for the thermal safety of ITE equipment. These requirements include:

* The equipment should be designed and manufactured to control and regulate the temperature.

* The equipment should be appropriately located to prevent overheating or cold damage.

* The equipment should have appropriate mechanisms for dissipating heat.

* The equipment should have an appropriate method for monitoring and controlling temperature.

How to Comply with BS EN 60950

4.1 Compliance Process

To ensure compliance with BS EN 60950, manufacturers of ITE equipment should follow the following process:

* Perform a risk assessment to identify potential hazards.

* Develop a safety plan to address those hazards.

* Design and manufacture the equipment in accordance with the safety plan.

* Perform testing to verify that the equipment meets the requirements of BS EN 60950.

* Affix the BS EN 60950 mark to the equipment.

4.2 Compliance Marking

BS EN 60950 requires manufacturers to affix the BS EN 60950 mark to their ITE equipment. This mark indicates that the equipment meets the requirements of the standard and is therefore safe for use.

Conclusion

BS EN 60950 is an important safety standard that focuses on the safety of ITE equipment. By following the guidelines and requirements set out in this article, manufacturers can ensure that their ITE equipment is safe for use and meets the needs of their customers.