Technological Innovation

IPX5/IPX6 Water Jet Nozzle Test Method

IEC60529 Spray water test Nozzle, ipx56 water Jet Nozzle

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.

The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel.


Item

IPX5

IPX6

Water supply

Water flow rate > 12.5L/min±5% clean water witho ut inclusion.
It can be achieved by the stainless steel water tank and pressurized equipment.

Water flow rate > 100L/min±5% clean water witho ut inclusion.
It can be achieved by the stainless steel water tank and pressurized equipment.

The nozzle diameter

6.3 mm

12.5 mm

Water flow

12.5±0.625L/min, Flow meter is adjustable.

100±0.625L/min, Flow meter is adjustable.

Testing time

Not less than 1min/(not less than 3 mins)

Environment requirements

Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation.

The distance from jet nozzle to enclosure

2.5~3m

Pressure Gauge

0 - 2.5 bar ( 0 - 0.25 MPa )

Reference standards

IEC60529,IEC60598-1,IEC60335-1,IEC60745-1

Nozzle Material

Stainless Steel

Include

Pressure gauge, Stainless steel nozzle IPX5 and IPX6, Valve for water flow regulation and shut off, Hose connector.




1.IPX5: spray holes of 6.3 mm, can meet the 12.5 L/min (100 L/newspapers) + 0.625 L/min;

Test method: the center of water from the nozzle diameter at 2.5 m for 40 mm circle, specimen surface water every square metre shell time about 1 min, test specimen at least 3 min, The nozzle surface distance from shell specimen should be 2.5 ~ 3 m;


2.IPX6: spray holes of 12.5 mm, can meet the 100 L/min (6000 L/newspapers) + 5 L/min;


Test method: the center of water from the nozzle diameter at 2.5 m for 120 mm circle, specimen surface water every square metre shell time about 1 min, Test time: at least 3 min, The nozzle distance: the nozzle surface distance from shell specimen should be 2.5 ~ 3 m;

CONTACT US

Contact: Eason Wang

Phone: +86-13751010017

E-mail: info@iec-equipment.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Scan the qr codeclose
the qr code
TAGS Test Probe BTest Probe 18Test Probe 14Test Probe 17Test Probe 32Test Probe 1Test Probe 2Test Probe 12Test Probe 31Test Probe ATest Probe 41Test Probe 19Test Probe DTest Probe CTest Probe 13Test Probe 11Test Probe 43Test PinTest FingerTest Probe