Technological Innovation

What is IEC 61000-4 39 2017 ?

Title: A Comprehensive Guide to IEC 61000-4-2:2019 for Electrostatic Discharge Immunity Testing

Introduction:

The 21st century is defined by the rapid advancement of technology, and the increasing reliance on electronic devices and systems in our daily lives. This growth has led to an increased need for a comprehensive understanding of the Electrostatic Discharge (ESD) immunity testing, as it plays a crucial role in ensuring the safety and reliability of these devices. IEC 61000-4-2:2019, also known as the "Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity testing," is an international standard that focuses on electrostatic discharge immunity testing for electrical and electronic equipment.

In this article, we will provide a comprehensive guide to IEC 61000-4-2:2019 for electrostatic discharge immunity testing. We will discuss the standard's scope, significance, test methods, and implications for the industry.

IEC 61000-4-2:2019 Scope:

IEC 61000-4-2:2019 is an international standard that focuses on electrostatic discharge immunity testing for electrical and electronic equipment. The standard was developed by the International Electrotechnical Commission (IEC) and is intended to provide a standardized method for evaluating the immunity of electrical equipment to electrostatic discharge.

The standard covers a wide range of topics, including the testing procedures, the environmental conditions, and the acceptance criteria. It is divided into four parts, each covering a different aspect of the testing procedure.

Part 1: Test procedures

This part provides the general principles for the testing procedure, including the requirements for the test setup, the type of equipment to be tested, and the procedures for conducting the test.

Part 2: Environmental conditions

This part sets the environmental conditions for the testing, including the temperature, humidity, and vibration requirements.

Part 3: Test procedures for immunity testing

This part outlines the specific procedures for conducting the electrostatic discharge immunity tests, including the test equipment, the test procedures, and the data evaluation requirements.

Part 4: Acceptance criteria

This part defines the acceptance criteria for the products, including the minimum and maximum allowable levels of the immunity to electrostatic discharge.

Significance of IEC 61000-4-2:2019:

IEC 61000-4-2:2019 is an essential standard for ensuring the safety and reliability of electrical and electronic equipment. The standard provides a standardized method for evaluating the immunity of equipment to electrostatic discharge, which is a common problem that can cause equipment failure and safety hazards.

By following the guidelines outlined in IEC 61000-4-2:2019, manufacturers can ensure that their products meet the necessary safety requirements and can provide reliable performance in a wide range of environmental conditions.

Test Methods:

The testing methods specified in IEC 61000-4-2:2019 are designed to provide a standardized method for evaluating the immunity of electrical and electronic equipment to electrostatic discharge. The standard provides a detailed description of the testing procedures, including the equipment to be tested, the environmental conditions, and the acceptance criteria.

The testing methods are based on the principle of applying a high voltage to the equipment under test, and measuring the resistance of the equipment to the flow of current. The test procedures are designed to provide a comprehensive evaluation of the equipment's immunity to electrostatic discharge, and are intended to be repeatable and reproducible.

Impact on Industry:

IEC 61000-4-2:2019 is an essential standard for ensuring the safety and reliability of electrical and electronic equipment. The standard provides a standardized method for evaluating the immunity of equipment to electrostatic discharge, which is a common problem that can cause equipment failure and safety hazards.

By following the guidelines outlined in IEC 61000-4-2:2019, manufacturers can ensure that their products meet the necessary safety requirements and can provide reliable performance in a wide range of environmental conditions. This will help to reduce the risk of equipment failure, safety hazards, and costly downtime.

Conclusion:

IEC 61000-4-2:2019 is an essential standard for ensuring the safety and reliability of electrical and electronic equipment. The standard provides a standardized method for evaluating the immunity of equipment to electrostatic discharge, which is a common problem that can cause equipment failure and safety hazards.

By following the guidelines outlined in IEC 61000-4-2:2019, manufacturers can ensure that their products meet the necessary safety requirements and can provide reliable performance in a wide range of environmental conditions. This will help to reduce the risk of equipment failure, safety hazards, and costly downtime.

FAQs:

Q1: What is the purpose of IEC 61000-4-2:2019?

A1: The purpose of IEC 61000-4-2:2019 is to provide a standardized method for evaluating the immunity of electrical and electronic equipment to electrostatic discharge, which is a common problem that can cause equipment failure and safety hazards.

Q2: Who is responsible for implementing IEC 61000-4-2:2019 in their products?

A2: Manufacturers, suppliers, and retailers are responsible for implementing IEC 61000-4-2:2019 in their products. The standard is intended to provide a comprehensive guide for evaluating the immunity of equipment to electrostatic discharge, and is intended to be a starting point for manufacturers looking to ensure the safety and reliability of their products.

Q3: What are the environmental conditions specified in IEC 61000-4-2:2019?

A3: The environmental conditions specified in IEC 61000-4-2:2019 include temperature, humidity, and vibration. The standard calls for a temperature range of -40°C to 60°C, a humidity range of 0 to 95%, and a vibration amplitude of 0 to 300 m/s.

Q4: How often is IEC 61000-4-2:2019 updated?

A4: IEC 61000-4-2:2019 is an international standard, which means it is reviewed and updated periodically by the International Electrotechnical Commission (IEC). The last update to the standard was in 2021.

Q5: How can I ensure that my products comply with IEC 61000-4-2:2019?

A5: To ensure that your products comply with IEC 61000-4-2:2019, you should review the standard thoroughly, and ensure that your products meet the requirements outlined in the standard. You should also consider adding any necessary safety features to your products to ensure their safety and reliability. It is also a good idea to test your products with the standard's testing method to ensure that they meet the standard's performance requirements.

CONTACT US

Contact: Eason Wang

Phone: +86-13751010017

E-mail: info@iec-equipment.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Scan the qr codeclose
the qr code
TAGS Test Probe BTest Probe 18Test Probe 14Test Probe 17Test Probe 32Test Probe 1Test Probe 2Test Probe 12Test Probe 31Test Probe ATest Probe 41Test Probe 19Test Probe DTest Probe CTest Probe 13Test Probe 11Test Probe 43Test PinTest FingerTest Probe